What Is A Car Tire Changer And When Do You Need It?

What is a tire changer?

Today with the development of science and technology, cars have been integrated into each of our lives and become an indispensable part! The car is used properly, it is a tool that brings us convenience.

The popularity of vehicles has led to the development of automobile maintenance equipment, and tire changers are one of the wheel equipment.

 

Car tire changer machine

Different models equipment to change a tire

Before the invention of the car tire changer, tires were replaced by hand, which is a relatively tedious task, and it may take several hours to replace a tire.

A tire changer is a machine used to remove tires and install tires on wheels. Hydraulically operated tire changing equipment uses compressed air and hydraulic oil to compress the tires and release them from the seals with the wheels.

When do you need to change car tires?

As a part of a car that comes into contact with the ground, tires have a huge impact on the vehicle. In maintaining the safety and performance of a car, tires are as important as engines. Tires can affect the efficiency of the car and can also cause fatal road accidents.

The frequency of tire replacement depends on many factors, including the type of car you own, where and how you drive, and how well you maintain your tires.

There is no doubt that no matter what kind of car, it has to go through changing a tire. The following are some common situations that require tire replacement.

 

Severe wear

Each tire tread groove has a wear limit mark, which is about 2mm thick. When you notice slipping on wet or slippery roads. At this point, you should start looking for new tires.

In addition, if the tire tread or pattern is generally cracked, it indicates that the tire has been seriously aging and needs to be replaced in time. Otherwise, due to the weakening of the sidewall strength of the tire, it is prone to puncture due to temperature rise in high-speed driving.

 

Tire repair frequently

One or two tire repairs will not affect the use of the tire, but after more than three times, it is recommended to replace the tire for safety reasons. Excessive damage has been compensated, but it still increases the probability of danger when driving at high speeds.

 

Tire deformation

It is a very dangerous thing for tires to be deformed. Such a situation proves that the metal coil inside the tire has been deformed or broken. It is best to go to a professional repair shop for inspection as soon as possible. Generally, it is recommended to replace the tire.

 

Car tires with foreign body

If the tire has foreign objects (nails, stones), sidewall punctures, or any other damage or defect that makes the tire unsafe, you need to consider car tire change.

 

Periodic inspection

The service life of a tire is usually about 5 years. After this time limit, the tire will begin to age. If it continues to be used, it will cause the tread to deform, and there is a risk of puncture. 

Therefore, even if the tires do not appear to be seriously worn, we must be vigilant. The most reliable way is to regularly check the tire condition at a professional tire shop to determine whether to replace a new tire.

 

What equipment is needed to replace car tires?

There is no doubt that vehicle repair equipment can improve work efficiency. The efficiency of modern machines makes car maintenance an easy job.

The modern vehicle repair shop has equipment tailored for special tasks. In recent years, many tire repair equipment has gradually appeared, such as car tire changer machines, car wheel aligners/alignments, car wheel balancers, car lifting equipment, and so on.

 

Automobile car tire changer

An automobile tire changer is a machine used by tire technicians to remove and install the tires of automobile wheels. After removing the wheel and tire assembly from the car, the car tire changer has all the components needed to remove and replace the tire from the wheel.

 

 

 

 Car Tire Changer - Car tire removal machine - GT526 Pro

Technology parameter of Automatic Tire changer - GT526 SE 

Max. wheel diameter	1120mm (40'')	Frequency	50/60 Hz
Max. wheel width	356mm (16'')	Working pressure	8-12bar
Inside chuck size	12''-26''	Bead breaker power per cylinder	2800kg
Outside chuck size	10''-24''	Rotate speed	6-12rpm
Power supply	220V 1PH/380V 3PH	Net weight	170kg

  

Conclusion

No one likes to change tires. It is important to ensure that your tires are in normal driving condition. Regular vehicle and tire inspections are worth your time. This is a necessary investment for your vehicle and all those who share the road with you.

ROADBUCK is a professional automotive repair equipment supplier. Whether you need to replace new tires, wheel alignment, or vehicle dynamic balance, ROADBUCK can provide corresponding high-quality wheel repair equipment.

2021-11-24