News

What models and sizes of tires is the Roadbuck V500 SE Professional Rear Arm Tire Loader suitable for?

The Roadbuck V500 SE Professional Tilt Arm Tire Loader is primarily suitable for small and medium-sized cars, but the exact model and tire size may vary depending on the model and configuration. Here's an overview of where it applies:

Scope of application of the model

Small and medium-sized automobiles: This disassembly machine is mainly designed to disassemble and assemble the tires of small and medium-sized automobiles, including but not limited to sedans, SUVs, MPVs and other common models.

Tire size applicable range

Common tire sizes: The Roadbuck V500 SE is capable of handling a wide range of common tire sizes, including but not limited to standard-sized passenger car tires, SUV tires, and more.

Special tires: The disassembly machine also supports the disassembly and assembly of special types of tires such as deflatable (explosion-proof) tires, low aspect ratio tires, and tubeless tires.

Specific parameters

While the exact parameters may vary depending on the model and configuration, in general, a Roocke-branded tire loader (such as the T5 Plus) has a large tire handling capacity, such as:

· Large tire diameter: up to 1120mm (44 inches)

· Large tire width: up to 420mm (16 inches)

· Chuck inner card size: 12"~26"

· Chuck Wild Card Size: 10"~24"

These parameters indicate that the Roadbuck brand of tire loaders is more capable of handling larger tire sizes, so the V500 SE model may also have similar performance.

To sum up, the Rodropmaster V500 SE Professional Swingarm Tire Loader is mainly suitable for tire removal and assembly operations of small and medium-sized cars, and is capable of handling a variety of common and special types of tires. However, please note that the specific scope of application needs to be determined with reference to the specific parameters and configuration of the model. When purchasing or using, it is recommended to consult the relevant manufacturer or distributor for more accurate information.

Guangdong Roadbuck Electromechanical Equipment Co., Ltd.: After 20 years of precipitation and development, ROADBUCK disassembly and assembly machine, wheel balancing machine and wheel aligner products have a complete range of products. Moreover, it has MAXCARL auto maintenance mall, which can provide professional supporting services for various auto repair and maintenance service enterprises.

Brand Website https://www.roadbuck3d.com/

MAXCARL Auto Maintenance Mall website

2024-11-28