What data can the Roadbuck Wheel Aligner G301H+ measure at one time?

The data that can be measured by the Roadbuck wheel aligner G301H+ at one time mainly includes the wheel alignment parameters, including:

· Camber: Measuring the angle of inclination of the wheels relative to the vertical line of the body, which has an important impact on the driving stability of the vehicle and tire wear.

· Caster angle of kingpin: Measure the angle between the axis of the kingpin and the vertical line of the ground, which affects the steering stability and the correcting torque of the vehicle.

· Kingpin camber: Measuring the angle of inclination of the kingpin axis in the lateral plane of the vehicle helps to reduce wheel runout and maintain steering stability when steering.

Toe angle: Measure the difference between the offset between the front end and the rear end of the wheel in the transverse plane, that is, the relative position of the left and right wheels on the same horizontal plane, which has an important impact on the straight driving performance of the vehicle and tire wear.

· Recline angle: reflects the degree of retraction of the wheels relative to the body when steering, helping to ensure the accuracy and stability of steering.

Thrust angle: Measure the angle between the center line of the wheel and the center line of the vehicle, which affects the straight driving ability of the vehicle and the wear of the tires.

In addition, depending on the specific configuration and inspection needs of the vehicle, the Robike Wheel Aligner G301 may also have the ability to measure other parameters such as wheel base, wheelbase, wheel roll radius, etc. The measurement of these parameters helps to have a comprehensive understanding of the positioning status of the wheels, which provides an important basis for the adjustment and maintenance of the vehicle.

Please note that specific measurement parameters and functions may vary depending on the device model, configuration, and software version. In actual use, it is recommended to refer to the operating manual of the equipment or contact the equipment supplier for the most accurate information.

Guangdong Roadbuck Electromechanical Equipment Co., Ltd.: After 20 years of precipitation and development, ROADBUCK disassembly and assembly machine, wheel balancing machine and wheel aligner products have a complete range of products. Moreover, it has MAXCARL auto maintenance mall, which can provide professional supporting services for various auto repair and maintenance service enterprises.

Brand Website https://www.roadbuck3d.com/

MAXCARL Auto Maintenance Mall website

2024-12-03