The working principle of Guangdong Roadmaster balancing machine

The working principle of the Guangdong Roadmaster balancing machine (taking the VS60 LCD fully automatic wheel balancing machine as an example) is based on the centrifugal force generated by uneven mass distribution when the rotor rotates. Wheel balancing is achieved through measurement and automatic correction. The specific steps can be divided into the following steps:

1. Core principles: centrifugal force and vibration detection

When the wheel (rotor) rotates around the axis, if the mass distribution is uneven, unbalanced centrifugal force will be generated. This centrifugal force acts on the bearings, causing vibration, noise, and accelerated bearing wear. The core task of the balancing machine is to detect this imbalance and reduce it to the allowable range through correction.

2. Measurement stage: electronic positioning and data collection

1. ALU-S Balanced Mode

VS60 adopts ALU-S mode and uses an electronic measuring arm to freely guide the installation position of the adhesive balance weight. The measuring arm can accurately locate the unbalanced points on the inner and outer sides of the wheel, avoiding errors caused by traditional mechanical positioning.

2. Laser positioning and high-precision sensing

Laser positioning: Use laser to indicate the sticking position of the balance weight to ensure operation accuracy.

Sensor detection: The vibration sensor captures the vibration signal when the wheel rotates, converts the physical vibration into an electrical signal, and transmits it to the electronic control system for analysis.

 

LCD display and data feedback

Equipped with a high-resolution LED LCD display that displays the phase (position) and size (value) of the imbalance in real time, allowing operators to obtain data intuitively.

3. Correction stage: automatic balancing and multiple verifications

1. Automatically add balance blocks

Based on the measurement results, the equipment automatically calculates the mass and position of the required balance weight, and completes the paste or split hidden installation of the balance weight through a robotic arm or operating guide. For example, VS60 supports split and hidden installation of adhesive balance weights to improve aesthetics.

2. Dynamic balance verification

Low-speed rotation test: After correction, the wheel runs at a lower speed (usually 1/10 of the design working condition) to simulate the actual working condition.

Phase and amplitude detection: Detect the vibration signal again through the sensor to confirm whether the imbalance reaches the set accuracy (such as the minimum remaining imbalance).

Iterative correction: If the standard is not reached, the equipment automatically repeats the measurement and correction process until the balance accuracy meets the requirements.

4. Technical features and advantages

High precision and automation

The minimum achievable residual imbalance is low, ensuring wheel balance accuracy.

Fully automatic operation reduces manual intervention and improves efficiency.

Adaptable

Supports wheel balancing of various specifications, with flexible design of measuring arm and drive shaft components.

Sturdy structure (such as thick box design) reduces motor resonance and improves measurement stability.

user friendliness

LCD display and independent button control, easy to operate.

Laser positioning and electronic guidance reduce the difficulty of operation and are suitable for users with different skill levels.

5. Application scenarios

·Guangdong Roadmaster balancing machines are widely used in automobile repair, tire manufacturing and other fields, especially suitable for scenarios that require high-precision balancing

Guangdong Roadbuck Electromechanical Equipment Co., Ltd.: ROADBUCK tire removal machine, balancing machine locator is designed for users who need more high-end use needs, the product after 20 years of precipitation and development, now it is quite mature, its products are complete. Moreover, it has MAXCARL auto maintenance mall, which can provide professional supporting services for various auto repair and maintenance service enterprises. The tire removal machine is mainly tilted and discless series, the balancing machine is mainly automatic measurement, and the locator focuses on diagnostic services. Therefore, consumers are positioned in professional wheel protection service centers, and professional users who have quality requirements for products.

Brand Website                                     https://www.roadbuck3d.com/                         0757-86600197

 

2025-11-20